|
Product Details:
Contact Now
Chat Now
|
| Filtration Area: | 0.25-16 M2 | Micron Rating Range: | 25μm-1200μm |
|---|---|---|---|
| Inlet/Outlet Size: | DN40 | Design Pressure: | 0.4 MPa |
| Filter Bag Material: | PP, Nylon, Polyester, PTFE | Number Of Filter Bags: | 1 Bag |
| Highlight: | Multi-Industry Liquid Filtration,Pressure Bag Filter Vessel,Quick-Open Closure Design |
||
The DL Series Bag Filter is a structurally innovative, compact, and highly adaptable multi-purpose pressure filtration device. Designed with a side inlet, quick-open cover mechanism, and reinforced internal mesh basket, this bag filter delivers efficient solid-liquid separation across a wide range of industrial applications.
Liquid enters through the side inlet of the filter housing and flows into the filter bag supported by a reinforced mesh basket. The liquid permeates through the precisely rated filter bag media, capturing impurity particles while allowing clean filtrate to exit. This pressure-driven process achieves high-efficiency separation with negligible material consumption.
| Industry | Application | Typical Micron Rating |
|---|---|---|
| Paint & Coatings | Final product polishing filtration | 25-100 microns |
| Beer & Beverage | Clarification and sterile prefiltration | 1-10 microns |
| Vegetable Oil | Secondary fine filtration after centrifuge | 5-50 microns |
| Pharmaceutical | API solution clarification | 1-25 microns |
| Industrial Water | Suspended solids removal | 50-200 microns |
Ideal for: Manufacturers requiring a single versatile filtration platform that can handle multiple product lines. Commonly deployed as secondary fine filtration downstream of centrifugal separators in edible oil and beverage processing lines.
Selecting the optimal bag filter configuration requires evaluating several key parameters against your specific process conditions:
| Parameter | What to Consider | Recommendation |
|---|---|---|
| Flow Rate | Maximum throughput in m³/h | 1-bag: 5-30 m³/h; 2-bag: 20-50 m³/h; 4-bag: 40-100+ m³/h |
| Micron Rating | Particle size to remove | Coarse (50-800µ): bulk solids; Fine (5-50µ): polishing; Ultra-fine (0.5-5µ): sterile pre-filtration |
| Liquid Type | Chemical compatibility | Water-based: PP/Nylon bags; Solvent/oil: PTFE bags; Acidic: SS316L housing + PTFE |
| Operating Temperature | Max process temperature | Standard: 120°C (EPDM seals); High-temp: 150°C (PTFE/Silicone seals) |
| Operating Pressure | System pressure rating | Standard: 0.6 MPa; Reinforced: 1.0 MPa (for viscous or high-solid loads) |
| Housing Material | Corrosion resistance needs | SS304: general industrial; SS316L: food, pharma, corrosive chemicals |
| Bag Change Frequency | Production schedule impact | Frequent changes: DL-QC quick-open series; Infrequent: standard closure |
| Installation Space | Available footprint | Limited space: DL-EC compact series; Ample space: standard configuration |
Contact Person: Ms. Doris.zhou
Tel: 8613961509768